conductive polymer tantalum solid capacitors surface mount type series: tpe size b small sizel 3.5 w 2.8 h 1.9 mm lowesr15 m? rohs compliance, halogen free r.voltage code unitv.dc unit r.capacitance code unitf ? externals of figure are the reference. b2 3.5 330 0.8 should a safety concern arise regarding this product, please be su re to contact us immediately. 25-apr-19 c8 120 s8 470 e8 150 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. 2.2 a8 100 n8 s0.2 w10.1 size code l0.2 w0.2 h0.1 s7 47 j8 220 1.9 2.8 e 2.5 k 8.0 g 4.0 a 10.0 leakage current Q 3 times of the initial limit marking d 2.0 j 6.3 damp heat (steady state) +60 c, 90 % to 95 %, 500 h, no-applied voltage capacitance change within +50 %, ?20 % of the initial value (2r5tpe220mazb (mapb, mafb)2r5tpe330mazb 2tpe330mafb (madgb)2tpe470majgb (mafb)2tpe330mfb etpe330mafb (ma9gb)) within +40 %, ?20 % of the initial value (except for a bove model) dimensions (not to scale) dissipation factor (tan ) please see the attached characteristics list dissipation factortan ) Q 1.5 times of the initial limit endurance +105 c, 1000 h rated voltage applied capacitance change within 20 % of the initial value dissipation factortan ) Q 1.5 times of the initial limit leakage current within the initial limit rated temp, +85 c products : +85 c, 1000 h, rated vol tage applied surge voltage rated voltage 1.15 C55 to +105 features specifications size code category temp. range b2 capacitance tolerance 20 % (120 hz / +20 ) leakage current rated volt. range category volt. range rated cap. range 2.0 v.dc to 10 v.dc 1.8 v.dc to 8.0 v.dc 47 f to 470 f please see the attached characteristics list r.capacitance code r. voltage code l polarity marking (+) lot no. s s w1 w h downloaded from: http:///
conductive polymer tantalum solid capacitors *1: ripple current100 khz / +45 *2: esr100 khz / +20 *3: tan (120 hz / +20 ) *4: after 5 minutes ? please refer to each page in this catarog for reflow conditions an d taping specifications. characteristics list reflow temp Q250 reflow temp Q260 floor life level ? l category temp. 25 tan *3 esr *2 (m max.) ripple *1 current (ma r.m.s.) size code 15 15 13/300khz 15 11/300khz min. packaging q'ty (pcs) 132.0 132.0 132.0 188.0 188.0 design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. category voltage v. d c rated temp. () rated voltag e (v.dc) rated cap. f case size 2tpe330mfb 0.08 0.08 0.10 105 105 105 2 3.5 2.8 0.10 0.08 h w specifications standard part number lc *4 a should a safety concern arise regarding this product, please be su re to contact us immediately. 25-apr-19 105 105 105 5.0 5.0 5.0 85 85 10 3.5 2.8 1400 8 3.5 2.8 3.5 2.8 3.5 2.8 100 47 6.3 1.9 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 1.9 1.9 1.9 1.9 3.5 2.8 0.08 0.08 0.08 3.5 2.8 3.5 2.8 15 15/300khz 21 0.08 0.08 25 3.5 2.8 1.9 1.9 1.9 1.9 0.08 1.9 1.9 3.5 2.8 3.5 2.8 3.5 2.8 1.9 0.08 0.08 0.08 4 3.5 2.8 3.5 2.8 220 1.9 35 1400 105 3.2 3.2 1.9 105 85 85 4.0 1400 1400 3.5 2.8 100 150 1.9 105 105 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 3.5 2.8 2.8 3.5 3.5 2.8 105 2.0 1.8 1.8 1.8 1.8 2.0 2.5 2.5 2.0 2.5 2.0 2.0 2.0 2.5 2.0 2.5 105 105 105 105 105 105 105 105 105 105 105 105 85 85 85 105 105 105 105 105 105 105 85 5.0 5.0 6.3 8.0 85 105 105 85 85 85 85 85 105 105 85 105 85 85 85 105 85 105 6.3 3.5 2.8 3.5 2.8 3.5 2.8 5.0 6.3 85 105 120 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2tpe330mafb 2tpe330madgb 2tpe470mafb 2tpe470majgb 2r5tpe220mafb 2r5tpe220mfgb 2r5tpe220mlb 2r5tpe220mapb 2r5tpe220mzb 2r5tpe220mazb 2r5tpe330mazb etpe330ma9gb etpe330m9gb etpe330mafb etpe330mfb 4tpe100mzb 4tpe150mazb 4tpe220mazb 6tpe100mpb 6tpe100mazb 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 138.6 138.6 80.0 47.0 6tpe100mzb 6tpe120mazb 6tpe150mapb 6tpe150mazb 6tpe220mazb 6tpe220mapb 8tpe100mazb 10tpe47mazb 63.0 63.0 75.6 94.5 94.5 0.08 0.08 63.0 110.0 110.0 55.0 55.0 55.0 55.0 82.5 165.0 165.0 165.0 165.0 88.0 40.0 60.0 0.08 0.08 0.10 0.08 0.08 35 35 35 9/300khz 9/300khz 15 15 35 35 35 35 35 25 35 35 25 35 35 0.08 0.08 0.08 2000 2000 2300 2300 2000 1800 1700 1600 0.10 0.08 0.08 0.08 0.08 3200 3200 2700 2700 2.5 3 3 220 150 100 330 220 470 330 b2 1600 1400 1400 1400 1600 1400 1400 1600 1400 1400 1400 1400 2000 downloaded from: http:///
conductive polymer tantalum solid capacitors surface mount type series: tpe size d low profile (height 1.5 mm max.) low esr (7 m) large capacitance (1500 f max.) rohs compliance, halogen free r.voltage code unitv.dc unit ? externals of figure are the reference. ? 1 0.1 :d15ed2e within +40 %, ?20 % of the initial value (except for a bove model) capacitance change surge voltage rated voltage 1.15 6tpe330map, 6tpe470mazu : +85 c, 2000 h, design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. 1.4 1.1 2.4 2.4 d4 7.3 4.3 25-apr-19 should a safety concern arise regarding this product, please be su re to contact us immediately. Q 1.5 times of the initial limit Q 3 times of the initial limit dissipation factortan ) leakage current damp heat (steady state) marking +60 c, 90 % to 95 %, 500 h, no-applied voltage within +50 %, ?20 % of the initial value 2r5tpe470m (ifc97)2r5tpe1000mf2r5tpe1500m (fc)) (2r5tpe220m (if9)2r5tpe330m (ifc97) e 2.5 6.3 j g 4.0 a 10.0 4.3 C55 to +105 size code features specifications rated volt. range category temp. range category volt. range d15e d2e d3l d4 6.3 v.dc 2.5 v.dc to 10 v.dc 5.0 v.dc 2.5 v.dc to 10 v.dc capacitance tolerance rated cap. range dissipation factortan ) leakage current 20 % (120 hz / +20 ) +105 c, 2000 h rated voltage applied Q 1.5 times of the initial limit within the initial limit capacitance change within 20 % of the initial value please see the attached characteristics list please see the attached characteristics list endurance dissipation factor (tan ) leakage current 470 f 68 f to 470 f 220 f to 680 f 330 f to 1500 f rated temp, +85 c products : +85 c, 1000 h, rated vol tage applied 3.8 1.3 2.4 d3l 7.3 4.3 2.8 1.3 2.4 d2e 7.3 1.8 1.3 dimensions (not to scale) size code d15e 7.3 4.3 w10.1 l0.2 w0.2 h0.1 s0.2 r.capacitance ( f) r.voltage code l polarity marking (+) lot no. s s w1 w h downloaded from: http:///
conductive polymer tantalum solid capacitors *1: ripple current100 khz / +45 *2: esr100 khz / +20 *3: tan (120 hz / +20 ) *4: after 5 minutes ? please refer to each page in this catarog for reflow conditions an d taping specifications. floor life ? level l w h design and specifications are each subject to change without noti ce. ask factory for the current technical specifications befor e purchase and/or use. should a safety concern arise regarding this product, please be su re to contact us immediately. 25-apr-19 reflow temp Q260 reflow temp Q250 ripple *1 current (ma r.m.s.) esr *2 (m max.) tan *3 lc *4 a part number min. packaging q'ty (pcs) rated cap. f 55.0 55.0 55.0 55.0 82.5 117.5 rated voltag e (v.dc) rated temp. () category voltage v. d c category temp. case size size code specifications standard characteristics list 117.5 117.5 117.5 82.5 82.5 82.5 82.5 82.5 375.0 60.0 88.0 88.0 88.0 117.5 170.0 170.0 250.0 375.0 188.0 63.0 63.0 94.5 94.5 132.0 132.0 188.0 188.0 188.0 207.9 207.9 207.9 207.9 207.9 94.5 138.6 138.6 138.6 207.9 428.4 68.0 220.0 220.0 330.0 207.9 296.1 296.1 296.1 428.4 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.15 0.15 0.15 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 0.10 9 15 18 25 7 9 12 15 18 25 7 9 0.10 0.15 0.15 0.15 0.15 0.10 0.10 0.10 15 12 15 18 15 12 15 18 12 15 15 18 25 18 25 18 25 18 25 12 35 18 25 25 25 9/500khz 15 15 18 25 18 25 25 25 3900 3100 2800 2400 4400 3900 3500 3100 2800 2400 4400 3900 3500 3100 25 18 25 25 18 18 25 10 3900 2800 3100 2800 2400 2800 3500 3100 3900 4400 3000 4400 1700 3500 3000 3500 2400 3900 3100 2800 2400 1.8 1.8 1.8 1.8 1.8 3000 2400 2800 2400 2400 2800 2400 2400 2400 2400 2800 2400 3100 2800 2800 2400 3500 3100 2800 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 1.8 4.3 4.3 4.3 1.4 3.8 3.8 3.8 3.8 2.8 2.8 2.8 2.8 3.8 1.8 1.8 1.8 1.8 2.8 1.8 1.8 1.8 1.8 1.8 1.8 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 1.8 2.8 2.8 3.8 2.8 2.8 2.8 2.8 1.8 1.8 1.8 1.8 1.8 2.8 2.8 3.8 3.8 3.8 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 4.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 4.3 4.3 4.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 330 105 105 105 105 105 105 105 105 105 105 105 105 150 1000 470 330 220 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 105 105 105 105 105 105 105 105 2.5 4.0 4.0 4.0 4.0 2.5 2.5 2.5 2.5 2.5 4.0 6.3 6.3 6.3 6.3 4.0 4.0 4.0 4.0 4.0 5.0 5.0 6.3 6.3 6.3 6.3 6.3 6.3 5.0 5.0 6.3 10.0 10.0 10.0 10.0 5.0 5.0 6.3 6.3 6.3 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 105 85 105 105 85 85 85 105 105 105 105 105 105 105 105 105 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 85 105 105 105 105 85 105 105 2000 2000 2000 3000 3000 3000 3000 3000 2500 2500 2500 2500 2500 3000 3000 3000 3000 3000 3000 2500 4000 2000 3000 3000 2500 2500 2500 3000 3000 3000 3000 3000 2500 2000 2r5tpe220m9 2r5tpe220mf 2r5tpe220mi 2r5tpe220m 2r5tpe330m7 2r5tpe330m9 2r5tpe330mc 2r5tpe330mf 2r5tpe330mi 2r5tpe330m 2r5tpe470m7 2r5tpe470m9 2r5tpe470mc 2r5tpe470mf 2000 2000 2000 3000 2500 2500 2500 2000 2r5tpe1500mf 4TPE150MI 4tpe220mf 4tpe220mi 4tpe220m 2r5tpe470mi 2r5tpe680mcl 2r5tpe680mfl 2r5tpe1000mf 2r5tpe1500mc 4tpe470ml 6tpe100mi 6tpe100m 6tpe150mf 6tpe150mi 4tpe330mi 4tpe330m 4tpe470mcl 4tpe470mfl 4tpe470mil 6tpe330mal 6tpe330ma9el 6tpe330mfl 6tpe330mil 6tpe330ml 6tpe150m 6tpe220mi 6tpe220m 6tpe220map 6tpe330map 6tpe680m 10tpe68m 10tpe220mil 10tpe220ml 10tpe330m 6tpe330maa 6tpe470mazu 6tpe470mi 6tpe470m 6tpe680mi 470 330 220 1500 680 d3l d4 d3l d2e d3l 68 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 7.3 10 6.3 4 2.5 d4 d2e d4 d15e 2a C 3 C 3 d2e d4 d3l d2e 220 680 470 330 220 150 100 downloaded from: http:///
if you want to use our products described in this onlin e catalog for applications requiring special qualities or reliability, or for applications where the failure or malfunction of the products may directly jeopardize human life or potentially caus e personal injury (e.g. aircraft and aerospace equipment, traffic and transportat ion equipment, combustion equipment, medical equipment, accident prevention, anti-crime eq uipment, and/or safety equipment), it is necessary to verify whether the specificatio ns of our products fit to such applications. please ensure that you will ask and check with our inquiry desk as to whether the specifications of our products fit to such applications use before you use our products. the quality and performance of our products as described in this online catalog only apply to our products when used in isolation. therefore, please en sure you evaluate and verify our products under the specific circumstances in which our pr oducts are assembled in your own products and in which our products will actually be used. if you use our products in equipment that requires a h igh degree of reliability, regardless of the application, it is recommended that you set up protectio n circuits and redundancy circuits in order to ensure safety of your equipment. the products and product specifications described in this online catalog are subject to change for improvement without prior notice. therefore, pleas e be sure to request and confirm the latest product specifications which explain the specifications of our products in detail, before you finalize the design of your applications, pu rchase, or use our products. the technical information in this online catalog provides example s of our products' typical operations and application circuits. we do not guarantee the non-infringement of third party's intellectual property rights and we do not grant any license, right, or interest in our intellectual property. if any of our products, product specifications and/or technical information in this online catalog is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially with regard to security and ex port control, shall be observed. the switchover date for compliance with the rohs directive /reach regulations varies depending on the part number or series of our products. when you use the inventory of our products for which it is unc lear whether those products are compliant with the rohs directive/reach regulation, please se lect "sales inquiry" in the website inquiry form and contact us. we do not take any responsibility for the use of our products outside the scope of the specifications, descriptions, guidelines and precautions described in this online catalog. guidelines and precautions regarding the described in this online catalog. downloaded from: http:///
|
